TKM MV MM ND

Temperature control coupling sleeve with valve


Properties

Connection 1 Hose connection
O-ring Viton, PTFE coated
Material Brass

Hints

Other pressure and temperature figures available on request.

Article Table

Product Name DN* Hose connection mm Connector dimension mm Operating pressure bar SF coup.* Mineral oil temp. min. °C Mineral oil temp. max. °C
Product Name DN* Hose connection mm Connector dimension mm Operating pressure bar SF coup.* Mineral oil temp. min. °C Mineral oil temp. max. °C
TKM 09 MV 06 MM ND 6 6 9 15,0 3 -15 150
TKM 09 MV 10 MM ND 10 10 9 15,0 3 -15 150
TKM 13 MV 10 MM ND 10 10 13 15,0 3 -15 150
TKM 13 MV 13 MM ND 12 13 13 15,0 3 -15 150
TKM 19 MV 16 MM ND 16 16 19 15,0 3 -15 150
TKM 19 MV 19 MM ND 19 19 19 15,0 3 -15 150
DN = Nominal diameter, nominal width - SF gek. = Safety factor coupled

Order hints

Other pressure and temperature figures available on request.

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.