T MG

Fitting, T shaped



Properties

Connection 1 - 3 metric cylindrical outer thread
Design Fitting
Construction T shaped
Sealing form 1 - 3 24° inner cone
Scope of supply Socket with union nut and cutting ring
Standard DIN 2353, ISO 8434-1
Material Brass

Article Table

Product Name Series Operating pressure Ø d2 mm L1 mm L2 mm AF mm S3
Product Name Series Operating pressure Ø d2 mm L1 mm L2 mm AF mm S3
T 04 LL MG LL PN 63 4 21 11,0 9 10
T 06 LL MG LL PN 63 6 21 9,5 9 12
T 08 LL MG LL PN 63 8 23 11,5 12 14
T 10 LL MG LL PN 63 10 27 15,5 14 17
T NW 04 HL MG L PN 250 6 27 12,0 12 14
T NW 06 HL MG L PN 200 8 29 14,0 12 17
T NW 08 HL MG L PN 200 10 30 15,0 14 19
T NW 10 HL MG L PN 200 12 32 17,0 17 22
T NW 13 HL MG L PN 200 15 36 21,0 19 27
T NW 16 HL MG L PN 200 18 40 23,5 24 32
T NW 20 HL MG L PN 100 22 44 27,5 27 36
T NW 25 HL MG L PN 100 28 47 30,5 36 41
T NW 32 HL MG L PN 100 35 56 34,5 41 50
T NW 40 HL MG L PN 100 42 63 40,0 50 60
T NW 03 HS MG S PN 400 6 31 16,0 12 17
T NW 04 HS MG S PN 400 8 32 17,0 14 19
T NW 06 HS MG S PN 400 10 34 17,5 17 22
T NW 08 HS MG S PN 400 12 38 21,5 17 24
T NW 10 HS MG S PN 400 14 40 22,0 19 27
T NW 13 HS MG S PN 250 16 43 24,5 24 30
T NW 16 HS MG S PN 250 20 48 26,5 27 36
T NW 20 HS MG S PN 250 25 54 30,0 36 46
T NW 25 HS MG S PN 250 30 62 35,5 41 50
T NW 32 HS MG S PN 200 38 72 41,0 50 60
Series: LL = Very light L = Light S = Heavy - PN = Nominal pressure PB = Max. operating pressure - Ø d2 = External pipe diameter

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.