T O HJ

Screw-in socket, T shaped

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 UN/UNF external threads
Connection 2 + 3 UN/UNF external threads
Construction T shaped
Design Adjustable direction screw-in socket
Material Steel
Sealing form 1 O-ring seal on screw-in socket
Sealing form 2 + 3 74° outer cone
Surface electro galvanised

Article Table

Product Name S1 OR AF mm G1 G2 + G3
Product Name S1 OR AF mm G1 G2 + G3
T O 04 HJ Screw-in socket, T shaped; Steel 14 8.92 x 1.83 11 7/16"-20 UNF 7/16"-20 UNF
T O 05 HJ Screw-in socket, T shaped; Steel 16 10.52 x 1.83 14 1/2"-20 UNF 1/2"-20 UNF
T O 06 HJ Screw-in socket, T shaped; Steel 17 11.90 x 1.98 14 9/16"-18 UNF 9/16"-18 UNF
T O 08 HJ Screw-in socket, T shaped; Steel 22 16.36 x 2.20 19 3/4" -16 UNF 3/4" -16 UNF
T O 10 HJ Screw-in socket, T shaped; Steel 27 19.18 x 2.46 22 7/8" -14 UNF 7/8" -14 UNF
T O 12 HJ Screw-in socket, T shaped; Steel 32 23.47 x 2.95 27 1.1/16" -12 UN 1.1/16" -12 UN
T O 16 HJ Screw-in socket, T shaped; Steel 38 29.74 x 2.95 33 1.5/16" -12 UN 1.5/16" -12 UN
T O 20 HJ Screw-in socket, T shaped; Steel 48 37.47 x 3.00 42 1.5/8" -12 UN 1.5/8" -12 UN
T O 24 HJ Screw-in socket, T shaped; Steel 55 43.69 x 3.00 48 1.7/8" -12 UN 1.7/8" -12 UN
SW, S1, S2, S3 = With across flats

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.