TRN FL 90

Screw nipple, BEL angle 90°

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 Pipe sockets
Material Steel
Sealing form 1 Cutting ring connection
Short code BEL
Standard ISO 8434-1
Surface electro galvanised

Hints

Choose the appropriate ferrule based on the hose type.
Final cutting ring assembly must be carried out in the hardened pre-assembly socket (VOM...).

Article Table

Product Name L1 mm L2 mm D2 mm AF mm Series DN Inches Size
Product Name L1 mm L2 mm D2 mm AF mm Series DN Inches Size
TRN 04 FL 90 45.0 44.0 Screw nipple, BEL angle 90°; Steel; electro galvanised 6.0 10 L 5 3/16" 3
DN = Nominal diameter, nominal width

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.