TRP AOS

Swage fitting, DKOS

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 metric nut thread
Material Steel
Scope of supply Swage nipple + swage ferrule
Sealing form 1 24° outer cone with O-ring
Short code DKOS
Standard ISO 8434-1
Surface electro galvanised

Article Table

Product Name L1 mm S1 OR AF mm G1 for external pipe Ø mm Series DN Inches Size
Product Name L1 mm S1 OR AF mm G1 for external pipe Ø mm Series DN Inches Size
TRP 04 AOS 55.0 Swage fitting, DKOS; Steel; electro galvanised 22 6.0 x 1.5 14 M 16 x 1.5 8 S 5 3/16" 3
TRP 06 AOS 04 61.0 Swage fitting, DKOS; Steel; electro galvanised 22 6.0 x 1.5 17 M 16 x 1.5 8 S 6 1/4" 4
TRP 06 AOS 61.0 Swage fitting, DKOS; Steel; electro galvanised 22 7.5 x 1.5 17 M 18 x 1.5 10 S 6 1/4" 4
TRP 08 AOS 06 64.0 Swage fitting, DKOS; Steel; electro galvanised 22 7.5 x 1.5 19 M 18 x 1.5 10 S 8 5/16" 5
TRP 08 AOS 64.0 Swage fitting, DKOS; Steel; electro galvanised 24 9.0 x 1.5 19 M 20 x 1.5 12 S 8 5/16" 5
TRP 10 AOS 08 68.0 Swage fitting, DKOS; Steel; electro galvanised 24 9.0 x 1.5 19 M 20 x 1.5 12 S 10 3/8" 6
TRP 10 AOS 68.0 Swage fitting, DKOS; Steel; electro galvanised 27 10.0 x 2.0 22 M 22 x 1.5 14 S 10 3/8" 6
TRP 13 AOS 75.0 Swage fitting, DKOS; Steel; electro galvanised 30 12.0 x 2.0 24 M 24 x 1.5 16 S 12 1/2" 8
DN = Nominal diameter, nominal width

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.