TRPE WGE

Polyethylene hose


Properties

Outer layer Polyethylene
Special features low weight, resistant to temperature and weatherproof
Insert none
Application Control lines in hydraulics and pneumatics, laboratory technology, tank and equipment manufacture
Colour yellow
Inner layer Polyethylene
Media Grease, Mineral oil, Propellants, resistant against aqueous acids, alkalis and salts and a variety of solvents

Hints

From 20 °C the pressure reduction factor is to be taken into account.

(Max. operating pressure = operating pressure x factor).

Temp.: 20 °C / 30 °C / 40 °C / 50 °C / 60 °C
Factor: 1,00 / 0,83 / 0,72 / 0,64 / 0,57

Article Table

Product Name Internal Ø mm External Ø mm Wall thickness mm BD* at 20 °C bar Min. bending radius mm
Product Name Internal Ø mm External Ø mm Wall thickness mm BD* at 20 °C bar Min. bending radius mm
TRPE 04-0.5 WGE 3,0 4 0,50 9 20
TRPE 04-0.65 WGE 2,7 4 0,65 13 20
TRPE 04-1 WGE 2,0 4 1,00 20 20
TRPE 05-1 WGE 3,0 5 1,00 15 25
TRPE 06-1 WGE 4,0 6 1,00 13 30
TRPE 08-1 WGE 6,0 8 1,00 8 40
TRPE 08-1.5 WGE 5,0 8 1,50 13 40
TRPE 10-1 WGE 8,0 10 1,00 6 60
TRPE 10-1.5 WGE 7,0 10 1,50 10 50
TRPE 10-2 WGE 6,0 10 2,00 15 50
TRPE 12-1 WGE 10,0 12 1,00 5 85
TRPE 12-1.5 WGE 9,0 12 1,50 9 60
TRPE 12-2 WGE 8,0 12 2,00 12 60
TRPE 14-1.5 WGE 11,0 14 1,50 8 80
TRPE 14-2 WGE 10,0 14 2,00 9 80
TRPE 15-1.5 WGE 12,0 15 1,50 7 90
TRPE 16-2 WGE 12,0 16 2,00 8 120
TRPE 18-2 WGE 14,0 18 2,00 7 120
TRPE 20-2 WGE 16,0 20 2,00 6 120
TRPE 22-2 WGE 18,0 22 2,00 5 150
TRPE 25-2.5 WGE 20,0 25 2,50 6 150
TRPE 30-2.5 WGE 25,0 30 2,50 5 260
BD = Working pressure

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.