TRPE WR

Polyethylene hose

  • Image_1 Image_1

Properties

Application area Control lines in hydraulics and pneumatics
tank and equipment manufacture
laboratory technology
Colour red
Inner layer Polyethylene
Insert none
Media Mineral oil
Grease
Propellants
resistant against aqueous acids, alkalis and salts and a variety of solvents
Outer layer Polyethylene
Special features resistant to temperature and weatherproof
low weight
Temp. max. 60 °C
Temp. min. -10 °C

Hints

From 20 °C the pressure reduction factor is to be taken into account.
(Max. operating pressure = operating pressure x factor).
Temp.: 20 °C / 30 °C / 40 °C / 50 °C / 60 °CFactor: 1,00 / 0,83 / 0,72 / 0,64 / 0,57

Article Table

Product Name Internal Ø nom. mm Unit Roll length m Wall thickness mm External Ø mm BD* at 20 °C bar Min. bending radius mm
Product Name Internal Ø nom. mm Unit Roll length m Wall thickness mm External Ø mm BD* at 20 °C bar Min. bending radius mm
TRPE 04-0.5 WR 3.0 Reel 100 Yes 0.50 4 9 20
TRPE 04-0.65 WR 2.7 Reel 100 Yes 0.65 4 13 20
TRPE 04-1 WR 2.0 Reel 100 Yes 1.00 4 20 20
TRPE 05-1 WR 3.0 Reel 100 Yes 1.00 5 15 25
TRPE 06-1 WR 4.0 Reel 100 Yes 1.00 6 13 30
TRPE 08-1 WR 6.0 Reel 100 Yes 1.00 8 8 40
TRPE 08-1.5 WR 5.0 Reel 100 Yes 1.50 8 13 40
TRPE 10-1 WR 8.0 Reel 100 Yes 1.00 10 6 60
TRPE 10-1.5 WR 7.0 Reel 100 Yes 1.50 10 10 50
TRPE 10-2 WR 6.0 Reel 100 Yes 2.00 10 15 50
TRPE 12-1 WR 10.0 Reel 100 Yes 1.00 12 5 85
TRPE 12-1.5 WR 9.0 Reel 100 Yes 1.50 12 9 60
TRPE 12-2 WR 8.0 Reel 100 Yes 2.00 12 12 60
TRPE 14-1.5 WR 11.0 Reel 100 Yes 1.50 14 8 80
TRPE 14-2 WR 10.0 Reel 100 Yes 2.00 14 9 80
TRPE 15-1.5 WR 12.0 Reel 100 Yes 1.50 15 7 90
TRPE 16-2 WR 12.0 Reel 100 Yes 2.00 16 8 120
TRPE 18-2 WR 14.0 Reel 100 Yes 2.00 18 7 120
TRPE 20-2 WR 16.0 Reel 100 Yes 2.00 20 6 120
TRPE 22-2 WR 18.0 Reel 100 Yes 2.00 22 5 150
TRPE 25-2.5 WR 20.0 Reel 100 Yes 2.50 25 6 150
TRPE 30-2.5 WR 25.0 Reel 100 Yes 2.50 30 5 260
BD = Working pressure

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.