TRP FS

Swage fitting, BES

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 Pipe sockets
Material Steel
Scope of supply Swage nipple + swage ferrule
Sealing form 1 Cutting ring connection
Short code BES
Standard ISO 8434-1
Surface electro galvanised

Hints

Final cutting ring assembly must be carried out in the hardened pre-assembly socket (VOM...).

Article Table

Product Name D2 mm L1 mm AF mm Series Inches DN Size
Product Name D2 mm L1 mm AF mm Series Inches DN Size
TRP 04 FS 8.0 59.0 14 S 3/16" 5 3
TRP 06 FS 10.0 67.0 14 S 1/4" 6 4
TRP 06 FS 04 8.0 65.0 14 S 1/4" 6 4
TRP 06 FS 08 12.0 68.0 17 S 1/4" 6 4
TRP 08 FS 12.0 71.0 17 S 5/16" 8 5
TRP 08 FS 06 10.0 70.0 17 S 5/16" 8 5
TRP 10 FS 14.0 79.0 19 S 3/8" 10 6
TRP 10 FS 06 10.0 75.0 19 S 3/8" 10 6
TRP 10 FS 08 12.0 77.0 19 S 3/8" 10 6
TRP 13 FS 16.0 87.0 24 S 1/2" 12 8
DN = Nenndurchmesser, Nennweite

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.