TRP HL

Swage fitting, CEL

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 metric cylindrical outer thread
Material Steel
Scope of supply Swage nipple + swage ferrule
Sealing form 1 24° inner cone
Short code CEL
Standard ISO 8434-1
Surface electro galvanised

Article Table

Product Name L1 mm S1 G1 for external pipe Ø mm Series Inches DN Size
Product Name L1 mm S1 G1 for external pipe Ø mm Series Inches DN Size
TRP 04 HL 47.0 17 M 12 x 1,5 6 L 3/16" 5 3
TRP 06 HL 53.0 17 M 14 x 1.5 8 L 1/4" 6 4
TRP 08 HL 57.0 19 M 16 x 1.5 10 L 5/16" 8 5
TRP 08 HL 10 57.0 22 M 18 x 1.5 12 L 5/16" 8 5
TRP 10 HL 63.0 22 M 18 x 1.5 12 L 3/8" 10 6
TRP 10 HL 13 64.0 27 M 22 x 1.5 15 L 3/8" 10 6
TRP 13 HL 70.0 27 M 22 x 1.5 15 L 1/2" 12 8
DN = Nenndurchmesser, Nennweite

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.