TRP HS

Swage fitting, CES

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 metric cylindrical outer thread
Material Steel
Scope of supply Swage nipple + swage ferrule
Sealing form 1 24° inner cone
Short code CES
Standard ISO 8434-1
Surface electro galvanised

Article Table

Product Name L1 mm S1 G1 for external pipe Ø mm Series DN Inches Size
Product Name L1 mm S1 G1 for external pipe Ø mm Series DN Inches Size
TRP 04 HS 03 49.0 Swage fitting, CES; Steel; electro galvanised 17 M 14 x 1.5 6 S 5 3/16" 3
TRP 04 HS 49.0 Swage fitting, CES; Steel; electro galvanised 19 M 16 x 1.5 8 S 5 3/16" 3
TRP 06 HS 55.0 Swage fitting, CES; Steel; electro galvanised 22 M 18 x 1.5 10 S 6 1/4" 4
TRP 06 HS 08 55.0 Swage fitting, CES; Steel; electro galvanised 24 M 20 x 1.5 12 S 6 1/4" 4
TRP 08 HS 64.0 Swage fitting, CES; Steel; electro galvanised 24 M 20 x 1.5 12 S 8 5/16" 5
TRP 10 HS 08 - Swage fitting, CES; Steel; electro galvanised - M 20 x 1.5 12 S 10 3/8" 6
TRP 10 HS 66.0 Swage fitting, CES; Steel; electro galvanised 27 M 22 x 1.5 14 S 10 3/8" 6
TRP 13 HS 71.0 Swage fitting, CES; Steel; electro galvanised 27 M 24 x 1.5 16 S 12 1/2" 8
DN = Nominal diameter, nominal width

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.