TRPU GE

Polyurethane hose

  • Image_1 Image_1

Properties

Colour yellow
Inner layer Polyurethane (PUR)
Insert none
Media aging resistant in oxygen and ozone
resistant to aliphatic hydrocarbons and most lubricating oils
resistant to hydrolysis and microbes
Outer layer Polyurethane (PUR)
Special features Hardness: 95-98° Shore A
very good cold flexibility
high abrasion resistance
Temp. max. 60 °C
Temp. min. -40 °C

Hints

From 20 °C the pressure reduction factor is to be taken into account.
(Max. operating pressure = operating pressure x factor).
Temp.: 20 °C / 30 °C / 40 °C / 50 °C / 60 °CFactor: 1,00 / 0,83 / 0,72 / 0,64 / 0,57

Article Table

Product Name Internal Ø nom. mm Unit Roll length m Wall thickness mm External Ø mm BD* at 20 °C bar Min. bending radius mm
Product Name Internal Ø nom. mm Unit Roll length m Wall thickness mm External Ø mm BD* at 20 °C bar Min. bending radius mm
TRPU 04-0.65 GE 2.7 Reel 100 Yes 0.65 4 8 20
TRPU 04-1 GE 2.0 Reel 100 Yes 1.00 4 14 20
TRPU 05-1 GE 3.0 Reel 100 Yes 1.00 5 17 20
TRPU 06-1 GE 4.0 Reel 100 Yes 1.00 6 14 30
TRPU 08-1 GE 6.0 Reel 100 Yes 1.00 8 10 35
TRPU 08-1.25 GE 5.5 Reel 100 Yes 1.25 8 13 30
TRPU 10-1 GE 8.0 Reel 100 Yes 1.00 10 7 50
TRPU 10-1.25 GE 7.5 Reel 100 Yes 1.25 10 10 40
BD = Working pressure

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.