TRPU S

Polyurethane hose


Properties

Outer layer Polyurethane
Special features Hardness: 95-98° Shore A, high abrasion resistance, very good cold flexibility
Insert none
Colour black
Inner layer Polyurethane
Media aging resistant in oxygen and ozone, resistant to aliphatic hydrocarbons and most lubricating oils, resistant to hydrolysis and microbes

Hints

From 20 °C the pressure reduction factor is to be taken into account.

(Max. operating pressure = operating pressure x factor).

Temp.: 20 °C / 30 °C / 40 °C / 50 °C / 60 °C
Factor: 1,00 / 0,83 / 0,72 / 0,64 / 0,57

Article Table

Product Name Internal Ø mm External Ø mm Wall thickness mm BD* at 20 °C bar Min. bending radius mm
Product Name Internal Ø mm External Ø mm Wall thickness mm BD* at 20 °C bar Min. bending radius mm
TRPU 04-0.65 S 2,7 4 0,65 8 20
TRPU 04-1 S 2,0 4 1,00 14 20
TRPU 05-1 S 3,0 5 1,00 17 20
TRPU 06-1 S 4,0 6 1,00 14 30
TRPU 08-1 S 6,0 8 1,00 10 35
TRPU 08-1.25 S 5,5 8 1,25 13 30
TRPU 10-1 S 8,0 10 1,00 7 50
TRPU 10-1.25 S 7,5 10 1,25 10 40
TRPU 10-1.5 S 7,0 10 1,50 12 40
BD = Working pressure

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.