TR WB

PA 12 plastic pipe, soft


Properties

Outer layer Polyamide
Special features low weight, resistant to temperature and weatherproof
Insert none
Application automotive technology, Control lines in hydraulics and pneumatics, laboratories and food industry
Colour blue
Inner layer Polyamide
Media Grease, Mineral oil, Propellants, resistant to aqueous acids, alkalis and salts
Temp. range Temperature peaks up to 120°C

Hints

From 20 °C the pressure reduction factor is to be taken into account.

(Max. operating pressure = operating pressure x factor).

Temp.: 20°C / 30° C / 40°C / 50 °C / 60°C / 70°C / 80°C / 90°C / 100°C / 110°C / 120°C
Factor: 1.00 / 0.83 / 0.72 / 0.64 / 0.57 / 0.52 / 0.47 / 0.44 / 0.36 / 0.32 / 0.28

Article Table

Product Name Internal Ø mm External Ø mm Wall thickness mm BD* at 20°C bar Min. bending radius mm
Product Name Internal Ø mm External Ø mm Wall thickness mm BD* at 20°C bar Min. bending radius mm
TR 04-0.5 WB 3,0 4,0 0,50 19,0 20
TR 04-0.65 WB 2,7 4,0 0,65 26,0 20
TR 04-1 WB 2,0 4,0 1,00 45,0 20
TR 05-0.85 WB 3,3 5,0 0,85 28,0 25
TR 05-1 WB 3,0 5,0 1,00 34,0 25
TR 06-1 WB 4,0 6,0 1,00 27,0 30
TR 08-1 WB 6,0 8,0 1,00 19,0 40
TR 08-1.25 WB 5,5 8,0 1,25 26,0 40
TR 08-1.5 WB 5,0 8,0 1,50 31,0 40
TR 10-1 WB 8,0 10,0 1,00 15,0 60
TR 10-1.25 WB 7,5 10,0 1,25 19,0 60
TR 10-1.5 WB 7,0 10,0 1,50 23,0 50
TR 10-2 WB 6,0 10,0 2,00 34,0 50
TR 12-1 WB 10,0 12,0 1,00 12,0 60
TR 12-1.5 WB 9,0 12,0 1,50 19,0 60
TR 12.5-1.25 WB 10,0 12,5 1,25 15,0 75
TR 12-2 WB 8,0 12,0 2,00 27,0 60
TR 14-1.5 WB 11,0 14,0 1,50 16,0 80
TR 14-2 WB 10,0 14,0 2,00 22,0 75
TR 15-1.5 WB 12,0 15,0 1,50 15,0 90
TR 16-2 WB 12,0 16,0 2,00 19,0 95
TR 18-2 WB 14,0 18,0 2,00 16,0 100
TR 20-2 WB 16,0 20,0 2,00 14,0 120
TR 22-2 WB 18,0 22,0 2,00 13,0 150
TR 25-2.5 WB 20,0 25,0 2,50 14,0 150
TR 28-2.5 WB 23,0 28,0 2,50 13,0 150
TR 30-2.5 WB 25,0 30,0 2,50 8,0 260
BD = Working pressure

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.