TR WR

PA 12 plastic pipe, soft

  • Image_1 Image_1

Properties

Application area Control lines in hydraulics and pneumatics
automotive technology
laboratories and food industry
Colour red
Inner layer Polyamid (PA)
Insert none
Media Mineral oil
Grease
Propellants
resistant to aqueous acids, alkalis and salts
Outer layer Polyamid (PA)
Special features resistant to temperature and weatherproof
low weight
Temp. max. 100 °C
Temp. min. -60 °C
Temp. range Temperature peaks up to 120°C

Hints

From 20 °C the pressure reduction factor is to be taken into account.
(Max. operating pressure = operating pressure x factor).
Temp.: 20°C / 30° C / 40°C / 50 °C / 60°C / 70°C / 80°C / 90°C / 100°C / 110°C / 120°CFactor: 1.00 / 0.83 / 0.72 / 0.64 / 0.57 / 0.52 / 0.47 / 0.44 / 0.36 / 0.32 / 0.28

Article Table

Product Name External Ø nom. mm Internal Ø nom. mm Unit Roll length m BD* at 20°C bar Wall thickness mm Min. bending radius mm
Product Name External Ø nom. mm Internal Ø nom. mm Unit Roll length m BD* at 20°C bar Wall thickness mm Min. bending radius mm
TR 04-0.5 WR 4.0 3.0 Reel 100 19.0 Yes 0.50 20
TR 04-0.65 WR 4.0 2.7 Reel 100 26.0 Yes 0.65 20
TR 04-1 WR 4.0 2.0 Reel 100 45.0 Yes 1.00 20
TR 05-0.85 WR 5.0 3.3 Reel 100 28.0 Yes 0.85 25
TR 05-1 WR 5.0 3.0 Reel 100 34.0 Yes 1.00 25
TR 06-1 WR 6.0 4.0 Reel 100 27.0 Yes 1.00 30
TR 08-1 WR 8.0 6.0 Reel 100 19.0 Yes 1.00 40
TR 08-1.25 WR 8.0 5.5 Reel 100 26.0 Yes 1.25 40
TR 08-1.5 WR 8.0 5.0 Reel 100 31.0 Yes 1.50 40
TR 10-1.5 WR 10.0 7.0 Reel 100 23.0 Yes 1.50 50
TR 10-1.25 WR 10.0 7.5 Reel 100 19.0 Yes 1.25 60
TR 10-1 WR 10.0 8.0 Reel 100 15.0 Yes 1.00 60
TR 10-2 WR 10.0 6.0 Reel 100 34.0 Yes 2.00 50
TR 12-1 WR 12.0 10.0 Reel 100 12.0 Yes 1.00 55
TR 12-1.5 WR 12.0 9.0 Reel 100 19.0 Yes 1.50 60
TR 12.5-1.25 WR 12.5 10.0 Reel 100 15.0 Yes 1.25 75
TR 12-2 WR 12.0 8.0 Reel 100 27.0 Yes 2.00 60
TR 14-1.5 WR 14.0 11.0 Reel 100 16.0 Yes 1.50 80
TR 14-2 WR 14.0 10.0 Reel 100 22.0 Yes 2.00 75
TR 15-1.5 WR 15.0 12.0 Reel 100 15.0 Yes 1.50 90
TR 16-2 WR 16.0 12.0 Reel 100 19.0 Yes 2.00 95
TR 18-2 WR 18.0 14.0 Reel 100 16.0 Yes 2.00 100
TR 20-2 WR 20.0 16.0 Reel 100 14.0 Yes 2.00 120
TR 22-2 WR 22.0 18.0 Reel 100 13.0 Yes 2.00 150
TR 25-2.5 WR 25.0 20.0 Reel 100 14.0 Yes 2.50 150
TR 28-2.5 WR 28.0 23.0 Reel 100 13.0 Yes 2.50 150
TR 30-2.5 WR 30.0 25.0 Reel 100 8.0 Yes 2.50 260
BD = Working pressure

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.