TR WT

PA 12 plastic pipe, soft


Properties

Outer layer Polyamide
Special features low weight, resistant to temperature and weatherproof
Insert none
Application automotive technology, Control lines in hydraulics and pneumatics, laboratories and food industry
Colour Transparent
Inner layer Polyamide
Media Grease, Mineral oil, Propellants, resistant to aqueous acids, alkalis and salts
Temp. range Temperature peaks up to 120°C

Hints

From 20 °C the pressure reduction factor is to be taken into account.

(Max. operating pressure = operating pressure x factor).

Temp.: 20°C / 30° C / 40°C / 50 °C / 60°C / 70°C / 80°C / 90°C / 100°C / 110°C / 120°C
Factor: 1.00 / 0.83 / 0.72 / 0.64 / 0.57 / 0.52 / 0.47 / 0.44 / 0.36 / 0.32 / 0.28

Article Table

Product Name Internal Ø mm External Ø mm Wall thickness mm BD* at 20°C bar Min. bending radius mm
Product Name Internal Ø mm External Ø mm Wall thickness mm BD* at 20°C bar Min. bending radius mm
TR 04-0.5 WT 3,0 4,0 0,500 19,0 20
TR 04-0.65 WT 2,7 4,0 0,650 26,0 20
TR 04-1 WT 2,0 4,0 1,000 44,0 20
TR 05-0.85 WT 3,3 5,0 0,850 28,0 25
TR 05-1 WT 3,0 5,0 1,000 34,0 25
TR 06-1 WT 4,0 6,0 1,000 27,0 30
TR 06-1.5 WT 3,0 6,0 1,500 45,0 30
TR 08-1 WT 6,0 8,0 1,000 19,0 40
TR 08-1.5 WT 5,0 8,0 1,500 31,0 40
TR 08-2 WT 4,0 8,0 2,000 45,0 40
TR 10-1 WT 8,0 10,0 1,000 15,0 60
TR 10-1.25 WT 7,5 10,0 1,250 19,0 60
TR 10-2 WT 6,0 10,0 2,000 34,0 50
TR 12-1 WT 10,0 12,0 1,000 12,0 55
TR 12-1.5 WT 9,0 12,0 1,500 19,0 60
TR 12-2 WT 8,0 12,0 2,000 27,0 60
TR 12.5-1.25 WT 10,0 12,5 1,250 15,0 75
TR 14-1.5 WT 11,0 14,0 1,500 16,0 80
TR 15-1.5 WT 12,0 15,0 1,500 15,0 90
TR 18-2 WT 14,0 18,0 2,000 16,0 100
TR 20-2 WT 16,0 20,0 2,000 14,0 120
TR 22-2 WT 18,0 22,0 2,000 13,0 150
TR 25-2.5 WT 20,0 25,0 2,500 14,0 150
TR 28-2.5 WT 23,0 28,0 2,500 13,0 150
TR 30-2.5 WT 25,0 30,0 2,500 8,0 260
BD = Working pressure

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.