TW OW

Tanker hose without helix

  • Image_1 Image_1

Properties

Application area Winding hose for tankers
Colour black
Inner layer NBR
Insert one textile braided insert with copper braid
Media All types of mineral oil products with a max. aromatic content of 50%
Outer layer NBR / SBR (patterned material)
Special features oil and petrol resistant pressure hose
electrical resistance R less than 10,000,000 Ohm
Standard NW 25: EN 1360; NW 32-40: EN 12115, NW 32-40: TRbF 131 Part 2
Temp. max. 65 °C
Temp. min. -20 °C

Article Table

Product Name Unit Roll length m Operating pressure bar Inches Internal Ø mm Burst pressure bar Wall thickness mm Min. bending radius mm
Product Name Unit Roll length m Operating pressure bar Inches Internal Ø mm Burst pressure bar Wall thickness mm Min. bending radius mm
TW OW 25 Reel 40 16 Yes 1" 25 64 6.0 150
TW OW 32 Reel 40 16 Yes 1.1/4" 32 64 6.0 190
TW OW 38 Reel 40 16 Yes 1.1/2" 38 64 6.5 230

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.