TW-TUEG MG

Tanker fitting, brass



Properties

Connection 1 Hose connection
Connection 2 BSP nut thread
Design with safety collar
Sealing form 2 Flat seal
Application Tankers
Scope of supply with PUR flat seal
Standard DIN EN 14 420-5
Material Brass

Article Table

Product Name DN* Ø D mm G1 Max. working pressure bar
Product Name DN* Ø D mm G1 Max. working pressure bar
TW-TUEG 12 13 MG 13 13,4 G 1/2" -14 16
TW-TUEG 34 19 MG 19 19,4 G 3/4" -14 16
TW-TUEG 10 25 MG 25 25,4 G 1" -11 16
TW-TUEG 114 32 MG 32 32,4 G 1.1/4" -11 16
TW-TUEG 112 35 MG 35 35,0 G 1.1/2” 16
TW-TUEG 112 38 MG 38 38,4 G 1.1/2” 16
TW-TUEG 20 38 MG 38 38,4 G 2" -11 16
TW-TUEG 20 50 MG 50 50,4 G 2" -11 16
TW-TUEG 212 63 MG 63 63,4 G 2.1/2" -11 16
TW-TUEG 30 75 MG 75 75,4 G 3" -11 16
TW-TUEG 40 100 MG 100 100,4 G 4" -11 16
DN = Nominal diameter, nominal width

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.