UEM B

Union nut for flange connection

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 metric nut thread
Design Union nut for flange connection
Material Steel
Surface electro galvanised

Hints

Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name L1 mm Operating pressure AF mm G1 for external pipe Ø mm Series Ø d2 mm
Product Name L1 mm Operating pressure AF mm G1 for external pipe Ø mm Series Ø d2 mm
UEM NW 04 LB 18.0 PN 315 14 M 12 x 1,5 6 L 7.7
UEM NW 06 LB 19.0 PN 315 17 M 14 x 1.5 8 L 9.5
UEM NW 08 LB 20.5 PN 315 19 M 16 x 1.5 10 L 11.7
UEM NW 10 LB 21.5 PN 315 22 M 18 x 1.5 12 L 13.8
UEM NW 13 LB 24.0 PN 315 27 M 22 x 1.5 15 L 17.7
UEM NW 16 LB 23.0 PN 315 32 M 26 x 1.5 18 L 21.1
UEM NW 20 LB 27.5 PN 160 36 M 30 x 2 22 L 24.3
UEM NW 25 LB 27.5 PN 160 41 M 36 x 2 28 L 30.3
UEM NW 32 LB 30.0 PN 160 50 M 45 x 2 35 L 38.2
UEM NW 40 LB 34.0 PN 160 60 M 52 x 2 42 L 45.2
UEM NW 03 SB 19.0 PN 630 17 M 14 x 1.5 6 S 7.7
UEM NW 04 SB 20.0 PN 630 19 M 16 x 1.5 8 S 9.5
UEM NW 06 SB 21.5 PN 630 22 M 18 x 1.5 10 S 11.7
UEM NW 08 SB 22.0 PN 630 24 M 20 x 1.5 12 S 13.8
UEM NW 10 SB 24.0 PN 630 27 M 22 x 1.5 14 S 17.7
UEM NW 13 SB 26.5 PN 400 30 M 24 x 1.5 16 S 18.6
UEM NW 16 SB 27.5 PN 400 36 M 30 x 2 20 S 24.3
UEM NW 20 SB 30.5 PN 400 46 M 36 x 2 25 S 28.6
UEM NW 25 SB 32.0 PN 400 50 M 42 x 2 30 S 34.1
UEM NW 32 SB 38.0 PN 315 60 M 52 x 2 38 S 42.2
Series: LL = Very light L = Light S = Heavy
PN = Nominal pressure PB = Max. operating pressure

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.