UEM B VA

Union nut for flange connection

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 metric nut thread
Design Union nut for flange connection
Material Stainless steel

Hints

Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name L1 mm Operating pressure AF mm G1 for external pipe Ø mm Series Ø d2 mm
Product Name L1 mm Operating pressure AF mm G1 for external pipe Ø mm Series Ø d2 mm
UEM NW 04 LB VA 18.0 PN 315 14 M 12 x 1,5 6 L 7.7
UEM NW 06 LB VA 19.0 PN 315 17 M 14 x 1.5 8 L 9.5
UEM NW 08 LB VA 20.5 PN 315 19 M 16 x 1.5 10 L 11.7
UEM NW 10 LB VA 21.5 PN 315 22 M 18 x 1.5 12 L 13.8
UEM NW 13 LB VA 24.0 PN 315 27 M 22 x 1.5 15 L 17.7
UEM NW 16 LB VA 23.0 PN 315 32 M 26 x 1.5 18 L 21.1
UEM NW 20 LB VA 27.5 PN 160 36 M 30 x 2 22 L 24.3
UEM NW 25 LB VA 27.5 PN 160 41 M 36 x 2 28 L 30.3
UEM NW 32 LB VA 30.0 PN 160 50 M 45 x 2 35 L 38.2
UEM NW 40 LB VA 34.0 PN 160 60 M 52 x 2 42 L 45.2
UEM NW 03 SB VA 19.0 PN 630 17 M 14 x 1.5 6 S 7.7
UEM NW 04 SB VA 20.0 PN 630 19 M 16 x 1.5 8 S 9.5
UEM NW 06 SB VA 21.5 PN 630 22 M 18 x 1.5 10 S 11.7
UEM NW 08 SB VA 22.0 PN 630 24 M 20 x 1.5 12 S 13.8
UEM NW 10 SB VA 24.0 PN 630 27 M 22 x 1.5 14 S 17.7
UEM NW 13 SB VA 26.5 PN 400 30 M 24 x 1.5 16 S 18.6
UEM NW 16 SB VA 27.5 PN 400 36 M 30 x 2 20 S 24.3
UEM NW 20 SB VA 30.5 PN 400 46 M 36 x 2 25 S 28.6
UEM NW 25 SB VA 32.0 PN 400 50 M 42 x 2 30 S 34.1
UEM NW 32 SB VA 38.0 PN 315 60 M 52 x 2 38 S 42.2
Series: LL = Very light L = Light S = Heavy
PN = Nominal pressure PB = Max. operating pressure

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.