UEM FM

Union function nut

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 metric nut thread
Design Union function nut
Material Steel
Scope of supply Union nut, cutting ring, soft seal
Surface electro galvanised

Hints

Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name L1 mm Operating pressure External pipe Ø mm S1 G1 Series Ø d2 mm
Product Name L1 mm Operating pressure External pipe Ø mm S1 G1 Series Ø d2 mm
UEM 04 FM LL 11.0 PN 100 4 10 M 8 x 1 LL 4
UEM 06 FM LL 11.5 PN 100 6 12 M 10 x 1 LL 6
UEM NW 04 FM L 14.5 PN 315 6 14 M 12 x 1,5 L 6
UEM NW 06 FM L 14.5 PN 315 8 17 M 14 x 1.5 L 8
UEM NW 08 FM L 15.5 PN 315 10 19 M 16 x 1.5 L 10
UEM NW 10 FM L 15.5 PN 315 12 22 M 18 x 1.5 L 12
UEM NW 13 FM L 17.0 PN 315 15 27 M 22 x 1.5 L 15
UEM NW 16 FM L 18.0 PN 315 18 32 M 26 x 1.5 L 18
UEM NW 20 FM L 20.0 PN 160 22 36 M 30 x 2 L 22
UEM NW 25 FM L 21.0 PN 160 28 41 M 36 x 2 L 28
UEM NW 32 FM L 24.0 PN 160 35 50 M 45 x 2 L 35
UEM NW 40 FM L 24.0 PN 160 42 60 M 52 x 2 L 42
UEM NW 03 FM S 16.5 PN 630 6 17 M 14 x 1.5 S 6
UEM NW 04 FM S 16.5 PN 630 8 19 M 16 x 1.5 S 8
UEM NW 06 FM S 17.5 PN 630 10 22 M 18 x 1.5 S 10
UEM NW 08 FM S 17.5 PN 630 12 24 M 20 x 1.5 S 12
UEM NW 10 FM S 20.5 PN 630 14 27 M 22 x 1.5 S 14
UEM NW 13 FM S 20.5 PN 400 16 30 M 24 x 1.5 S 16
UEM NW 16 FM S 24.0 PN 400 20 36 M 30 x 2 S 20
UEM NW 20 FM S 27.0 PN 400 25 46 M 36 x 2 S 25
UEM NW 25 FM S 29.0 PN 400 30 50 M 42 x 2 S 30
UEM NW 32 FM S 32.5 PN 315 38 60 M 52 x 2 S 38
Series: LL = Very light L = Light S = Heavy
Ø d2 = External pipe diameter

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.