UEM KT

Union nut for conical nozzles

  • Image_1 Image_1

Properties

Application area in construction, mining and tunnel building
Connection 1 BSP nut thread
Material Malleable iron
Media Compressed air
Water
Standard DIN 8537 / 20 033
Surface electro galvanised
Temp. max. 95 °C
Temp. min. -40 °C

Article Table

Product Name b mm Operating pressure Hole Ø mm G1 Length mm
Product Name b mm Operating pressure Hole Ø mm G1 Length mm
UEM 3/4 KT 58 PN 25 21.5 G 3/4" -14 23
UEM 1 KT 65 PN 25 23.0 G 1" -11 28
UEM 1 L KT 65 PN 25 27.5 G 1" -11 28
G1 = Thread of connection 1

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.