UEM KT RD

Union nut for conical nozzles

  • Image_1 Image_1

Properties

Application area in construction, mining and tunnel building
Connection 1 Rund nut thread
Material Malleable iron
Media Compressed air
Water
Standard DIN 8537 / 20 033
Surface electro galvanised
Temp. max. 95 °C
Temp. min. -40 °C

Article Table

Product Name b mm Operating pressure G1 Length mm Hole Ø mm
Product Name b mm Operating pressure G1 Length mm Hole Ø mm
UEM RD 32 65 PN 25 Rd 32 x 1/8" 28 23.0
UEM RD 32-2 65 PN 25 Rd 32 x 1/8" 28 27.5
UEM RD 38 76 PN 25 Rd 38 x 1/8" 33 29.0
UEM RD 46 86 PN 25 Rd 46 x 1/6" 36 35.0
UEM RD 55 95 PN 25 Rd 55 x 1/6" 38 42.0
UEM RD 62 105 PN 25 Rd 62 x 1/6" 44 49.0
UEM RD 75 137 PN 25 Rd 75 x 1/6" 50 61.0
UEM RD 105 158 PN 25 Rd 105 x 1/4" 60 -
G1 = Thread of connection 1

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.