UWR

Rod seal UWR



Properties

Application Hydraulics
Design Double wiper seal
Media Mineral oils, Water
Material NBR
Installation bend the wiper into a kidney shape and press into the locating groove

Description

Easy assembly.
Also wipes off leak oil from seal chamber.

Hints

Tolerance: d= h11; D= +0.2/0; L= +0.1/0; C +0.2/0

Article Table

Product Name D mm d mm L mm C mm
Product Name D mm d mm L mm C mm
UWR 470 80 20,6 12,0 5,3 15,0
UWR 620 87 22,6 16,0 3,8 19,0
UWR 781 10 28,6 20,0 5,3 23,0
UWR 118 149 38,6 30,0 5,3 33,0
UWR 137 169 43,6 35,0 5,3 38,0
UWR 157 188 48,6 40,0 5,3 43,0
UWR 165 196 50,0 42,0 5,3 45,0
UWR 177 208 53,6 45,0 5,3 48,0
UWR 255 287 73,6 65,0 5,3 68,0
UWR 260 292 74,6 66,0 5,3 69,0
UWR 301 348 88,7 76,5 7,1 82,5
UWR 307 362 92,2 78,0 7,1 85,0

Order hints

For special operating conditions (fluid, temperature, pressure ...) please contact us.
We are able to produce wipers with diameters of 20 to 510 mm with short lead times.
Alternative material possible: FPM.

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.