VERSCHLUSS O IS

Blanking socket, with hexagon socket

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 UN/UNF external threads
Construction straight
Design Blanking socket, with hexagon socket
Material Steel
Sealing form 1 O-ring seal
Surface electro galvanised

Article Table

Product Name S1 G1 OR
Product Name S1 G1 OR
VERSCHLUSSO02IS 3 5/16"-24 UNF 6.07 x 1.63
VERSCHLUSSO03IS 4 3/8"-24 UNF 7.65 x 1.78
VERSCHLUSSO04IS 5 7/16"-20 UNF 8.92 x 1.83
VERSCHLUSSO05IS 5 1/2"-20 UNF 10.52 x 1.83
VERSCHLUSSO06IS 6 9/16"-18 UNF 11.90 x 1.98
VERSCHLUSSO08IS 8 3/4" -16 UNF 16.36 x 2.20
VERSCHLUSSO10IS 10 7/8" -14 UNF 19.18 x 2.46
VERSCHLUSSO12IS 14 1.1/16" -12 UN 23.47 x 2.95
VERSCHLUSSO14IS 14 1.3/16" -12 UN 26.59 x 2.95
VERSCHLUSSO16IS 17 1.5/16" -12 UN 29.74 x 2.95
VERSCHLUSSO20IS 22 1.5/8" -12 UN 37.47 x 3.00
VERSCHLUSSO24IS 22 1.7/8" -12 UN 43.69 x 3.00
VERSCHLUSSO32IS 22 2.1/2" -12 UN 59.36 x 3.00
SW, S1, S2 = With across flats

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.