VET MG

Fitting, T shaped



Properties

Connection 1 metric nut thread
Connection 2 + 3 metric cylindrical outer thread
Design Adjustable direction fitting
Construction T shaped
Sealing form 1 Pipe socket with cutting ring
Sealing form 2 + 3 24° inner cone
Scope of supply Socket with union nut and cutting ring
Standard DIN 2353, ISO 8434-1
Material Brass

Hints

Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name Series Operating pressure Ø d2 mm G1 L1 mm L2 mm L3 mm AF mm S1
Product Name Series Operating pressure Ø d2 mm G1 L1 mm L2 mm L3 mm AF mm S1
VET NW 04 HL MG L PN 200 6 M 12 x 1.5 27 12,0 26,0 12 14
VET NW 06 HL MG L PN 200 8 M 14 x 1.5 29 14,0 27,0 12 17
VET NW 08 HL MG L PN 200 10 M 16 x 1.5 30 15,0 28,5 14 19
VET NW 10 HL MG L PN 200 12 M 18 x 1.5 32 17,0 29,0 17 22
VET NW 13 HL MG L PN 200 15 M 22 x 1.5 36 21,0 32,0 19 27
VET NW 16 HL MG L PN 200 18 M 26 x 1.5 40 23,5 36,0 24 32
VET NW 04 HS MG S PN 250 8 M 16 x 1.5 32 17,0 27,0 14 19
Series: LL = Very light L = Light S = Heavy - PN = Nominal pressure PB = Max. operating pressure - Ø d2 = External pipe diameter

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.