VEW HF

Fitting, angle 90°, French series



Properties

Connection 1 metric nut thread
Connection 2 metric cylindrical outer thread
Construction type French series
Design Adjustable direction fitting
Construction Angle 90°
Sealing form 1 24° outer cone
Sealing form 2 24° inner cone
Scope of supply Socket with union nut and cutting ring
Surface electro galvanised
Material Steel

Hints

Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name Operating pressure Ø d2 mm G1 L1 mm L2 mm L3 mm AF mm S1
Product Name Operating pressure Ø d2 mm G1 L1 mm L2 mm L3 mm AF mm S1
VEW NW 10 HF PN 300 13,25 M 20 x 1.5 25 16 30,5 19 27
VEW NW 13 HF PN 300 16,75 M 24 x 1.5 27 18 32,5 24 30
VEW NW 16 HF PN 200 21,25 M 30 x 1.5 32 23 36,5 30 36
VEW NW 20 HF PN 200 26,75 M 36 x 1.5 36 27 41,0 36 46
VEW NW 25 HF PN 160 33,50 M 45 x 1.5 44 35 47,5 46 55
Series: LL = Very light L = Light S = Heavy - PN = Nominal pressure PB = Max. operating pressure - Ø d2 = External pipe diameter

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.