VEW MG

Fitting, angle 90°

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 metric nut thread
Connection 2 metric cylindrical outer thread
Construction Angle 90°
Design Adjustable direction fitting
Material Brass
Scope of supply Socket with union nut and cutting ring
Sealing form 1 Pipe socket with cutting ring
Sealing form 2 24° inner cone
Standard DIN 2353
ISO 8434-1

Hints

Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name L1 mm L2 mm Operating pressure External pipe Ø mm S1 L3 mm AF mm G1 Series Ø d2 mm
Product Name L1 mm L2 mm Operating pressure External pipe Ø mm S1 L3 mm AF mm G1 Series Ø d2 mm
VEW NW 04 HL MG 27 12.0 PN 200 6 14 26.0 12 M 12 x 1,5 L 6
VEW NW 06 HL MG 29 14.0 PN 200 8 17 27.5 12 M 14 x 1.5 L 8
VEW NW 08 HL MG 30 15.0 PN 200 10 19 29.0 14 M 16 x 1.5 L 10
VEW NW 10 HL MG 32 17.0 PN 200 12 22 29.5 17 M 18 x 1.5 L 12
VEW NW 13 HL MG 36 21.0 PN 200 15 27 32.5 19 M 22 x 1.5 L 15
VEW NW 16 HL MG 40 23.5 PN 200 18 32 35.5 24 M 26 x 1.5 L 18
VEW NW 20 HL MG 44 27.5 PN 100 22 36 38.0 27 M 30 x 2 L 22
VEW NW 03 HS MG 31 16.0 PN 400 6 17 27.0 12 M 14 x 1.5 S 6
VEW NW 04 HS MG 32 17.0 PN 400 8 19 27.5 14 M 16 x 1.5 S 8
VEW NW 06 HS MG 34 17.5 PN 400 10 22 29.5 17 M 18 x 1.5 S 10
VEW NW 08 HS MG 38 21.5 PN 400 12 24 30.5 17 M 20 x 1.5 S 12
VEW NW 13 HS MG 43 24.5 PN 250 16 30 36.5 24 M 24 x 1.5 S 16
VEW NW 20 HS MG 54 30.0 PN 250 25 46 49.5 36 M 36 x 2 S 25
VEW NW 25 HS MG 62 35.5 PN 250 30 50 55.0 41 M 42 x 2 S 30
Series: LL = Very light L = Light S = Heavy
PN = Nominal pressure PB = Max. operating pressure
Ø d2 = External pipe diameter

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.