V HF

Fitting, French series

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 + 2 metric cylindrical outer thread
Construction straight
Construction type French series
Design Fitting
Material Steel
Scope of supply Socket with union nut and cutting ring
Sealing form 1 + 2 24° inner cone
Surface electro galvanised

Hints

Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name L2 mm L1 mm Operating pressure S1 Ø d1 mm AF mm Ø d2 mm S2
Product Name L2 mm L1 mm Operating pressure S1 Ø d1 mm AF mm Ø d2 mm S2
V NW 10 HF 13 58.0 PN 400 27 13.25 22 13.25 27
V NW 13 HF 10 14 60.0 PN 250 30 16.75 27 13.25 27
V NW 13 HF 14 61.0 PN 250 30 16.75 27 16.75 30
V NW 16 HF 13 17 64.5 PN 250 36 21.25 32 16.75 30
V NW 16 HF 19 67.0 PN 250 36 21.25 32 21.25 36
V NW 20 HF 13 18 66.5 PN 250 42 26.75 41 16.75 30
V NW 20 HF 20 70.0 PN 250 42 26.75 36 26.75 42
V NW 25 HF 16 24 73.0 PN 160 55 33.50 46 21.25 36
V NW 25 HF 20 24 74.0 PN 160 55 33.50 46 26.75 42
V NW 25 HF 26 76.0 PN 160 55 33.50 46 33.50 55
Series: LL = Very light L = Light S = Heavy
PN = Nominal pressure PB = Max. operating pressure
Ø d2 = External pipe diameter

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.