VHM 90 ED VA

Blanking screw with hexagon socket

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 metric cylindrical outer thread
Construction straight
Design Blanking screw with hexagon socket
Material Stainless steel
Sealing form 1 Shape E

Article Table

Product Name i mm Operating pressure D mm G l mm S mm
Product Name i mm Operating pressure D mm G l mm S mm
VHM 90-10 ED VA 8 PN 400 14.0 M 10 x 1 12.0 5
VHM 90-12 ED VA 12 PN 400 17.0 M 12 x 1,5 16.0 6
VHM 90-14 ED VA 12 PN 400 19.0 M 14 x 1.5 16.0 6
VHM 90-16 ED VA 12 PN 400 22.0 M 16 x 1.5 16.0 8
VHM 90-18 ED VA 12 PN 400 24.0 M 18 x 1.5 17.0 8
VHM 90-20 ED VA 14 PN 400 26.0 M 20 x 1.5 19.0 10
VHM 90-22 ED VA 14 PN 400 27.0 M 22 x 1.5 19.0 10
VHM 90-26 ED VA 16 PN 400 32.0 M 26 x 1.5 21.0 12
VHM 90-27 ED VA 16 PN 400 32.0 M 27 x 2 21.0 12
VHM 90-33 ED VA 16 PN 400 40.0 M 33 x 2 22.5 17
VHM 90-42 ED VA 16 PN 315 50.0 M 42 x 2 22.5 22
VHM 90-48 ED VA 16 PN 315 55.0 M 48 x 2 22.5 24
PN = Nominal pressure PB = Max. operating pressure

Order hints

Seals of NBR
FPM (Viton) on request

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.