VN MG

Screw in fitting

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 NPT external threads
Connection 2 metric cylindrical outer thread
Construction straight
Design Screw-in fitting
Lieferumfang Socket with union nut and cutting ring
Material Brass
Sealing form 1 thread seal
Sealing form 2 24° inner cone
Standard DIN 2353, ISO 8434-1

Hints

Hinweise zur Montage, Einbau, Druckbelastung und zulässige Betriebstemperaturen entnehmen Sie bitte den technischen Informationen für Rohrverschraubungen.

Article Table

Product Name i mm L1 mm L2 mm Betriebsdruck G Rohr-Außen Ø mm S1 S3 Baureihe
Product Name i mm L1 mm L2 mm Betriebsdruck G Rohr-Außen Ø mm S1 S3 Baureihe
VN06LLMG 10.0 mm 28.0 mm 16.5 mm PN 63 1/8" -27 NPT 6 mm 11 12 LL
VN08LLMG 10.0 mm 30.0 mm 18.5 mm PN 63 1/8" -27 NPT 8 mm 12 14 LL
VNNW04HLMG 10.0 mm 32.0 mm 17.0 mm PN 200 1/8" -27 NPT 6 mm 12 14 L
VNNW04HL1/4MG 15.0 mm 38.0 mm 23.0 mm PN 200 1/4" -18 NPT 6 mm 17 14 L
VNNW04HL1/2MG 20.0 mm 44.0 mm 29.0 mm PN 200 1/2" -14 NPT 6 mm 24 14 L
VNNW06HLMG 15.0 mm 38.0 mm 23.0 mm PN 200 1/4" -18 NPT 8 mm 17 17 L
VNNW08HLMG 15.0 mm 39.0 mm 24.0 mm PN 200 1/4" -18 NPT 10 mm 17 19 L
VNNW10HL1/4MG 15.0 mm 40.0 mm 25.0 mm PN 200 1/4" -18 NPT 12 mm 19 22 L
VNNW10HLMG 15.5 mm 40.0 mm 25.0 mm PN 200 3/8" -18 NPT 12 mm 19 22 L
VNNW10HL1/2MG 20.0 mm 45.0 mm 30.0 mm PN 200 1/2" -14 NPT 12 mm 24 22 L
VNNW13HLMG 20.0 mm 46.0 mm 31.0 mm PN 200 1/2" -14 NPT 15 mm 24 27 L
VNNW16HLMG 20.0 mm 48.0 mm 31.5 mm PN 200 1/2" -14 NPT 18 mm 27 32 L
VNNW20HLMG 20.0 mm 50.0 mm 33.5 mm PN 100 3/4" -14 NPT 22 mm 32 36 L
VNNW25HLMG 25.0 mm 56.0 mm 39.5 mm PN 100 1" -11.5 NPT 28 mm 41 41 L
VNNW03HSMG 15.0 mm 43.0 mm 28.0 mm PN 400 1/4" -18 NPT 6 mm 17 17 S
VNNW04HSMG 15.0 mm 43.0 mm 28.0 mm PN 400 1/4" -18 NPT 8 mm 17 19 S
VNNW04HS1/2MG 19.5 mm 50.0 mm 35.0 mm PN 400 1/2" -14 NPT 8 mm 22 19 S
VNNW06HSMG 15.5 mm 44.0 mm 27.5 mm PN 400 3/8" -18 NPT 10 mm 19 22 S
VNNW06HS1/2MG 20.0 mm 51.0 mm 34.5 mm PN 400 1/2" -14 NPT 10 mm 24 22 S
VNNW08HSMG 15.5 mm 46.0 mm 29.5 mm PN 400 3/8" -18 NPT 12 mm 22 24 S
VNNW08HS1/2MG 20.0 mm 51.0 mm 34.5 mm PN 400 1/2" -14 NPT 12 mm 24 24 S
VNNW10HSMG 20.0 mm 54.0 mm 36.0 mm PN 400 1/2" -14 NPT 14 mm 24 27 S
VNNW13HSMG 20.0 mm 54.0 mm 35.5 mm PN 250 1/2" -14 NPT 16 mm 27 30 S
VNNW16HSMG 20.0 mm 59.0 mm 37.5 mm PN 250 3/4" -14 NPT 20 mm 32 36 S
PN = Nominal pressure PB = Max. operating pressure, Series: LL = Very light L = Light S = Heavy, Ø = External pipe diameter

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.