VOM

Pre-assembly sockets

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Design Pre-assembly sockets
Material Hardened tool steel
Surface phosphate treated

Description

for manual fitting

Hints

Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name Ø d mm T +/- 0.05 mm G1 Series
Product Name Ø d mm T +/- 0.05 mm G1 Series
VOM 04 LL 4 4.0 M 8 x 1 LL
VOM 06 LL 6 5.5 M 10 x 1 LL
VOM 08 LL 8 5.5 M 12 x 1 LL
VOM 10 LL 10 7.0 M 14 x 1 LL
VOM 12 LL 12 7.0 M 16 x 1 LL
VOM NW 04 HL 6 7.0 M 12 x 1,5 L
VOM NW 06 HL 8 7.0 M 14 x 1.5 L
VOM NW 08 HL 10 7.0 M 16 x 1.5 L
VOM NW 10 HL 12 7.0 M 18 x 1.5 L
VOM NW 13 HL 15 7.0 M 22 x 1.5 L
VOM NW 16 HL 18 7.5 M 26 x 1.5 L
VOM NW 20 HL 22 7.5 M 30 x 2 L
VOM NW 25 HL 28 7.5 M 36 x 2 L
VOM NW 32 HL 35 10.5 M 45 x 2 L
VOM NW 40 HL 42 11.0 M 52 x 2 L
VOM NW 03 HS 6 7.0 M 14 x 1.5 S
VOM NW 04 HS 8 7.0 M 16 x 1.5 S
VOM NW 06 HS 10 7.5 M 18 x 1.5 S
VOM NW 08 HS 12 7.5 M 20 x 1.5 S
VOM NW 10 HS 14 8.0 M 22 x 1.5 S
VOM NW 13 HS 16 8.5 M 24 x 1.5 S
VOM NW 16 HS 20 10.5 M 30 x 2 S
VOM NW 20 HS 25 12.0 M 36 x 2 S
VOM NW 25 HS 30 13.5 M 42 x 2 S
VOM NW 32 HS 38 16.0 M 52 x 2 S
Series: LL = Very light L = Light S = Heavy

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.