VOM WR

Pre-assembly sockets

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Design Pre-assembly sockets
Material Hardened tool steel
Surface phosphate treated

Hints

DIe VOM WR dient nur zur Montage der UEM WR

Article Table

Product Name Ø d mm G1 Baureihe T mm
Product Name Ø d mm G1 Baureihe T mm
VOMNW04HLWR 6 mm M 12 x 1,5 L 7.0 mm
VOMNW06HLWR 8 mm M 14 x 1.5 L 7.0 mm
VOMNW08HLWR 10 mm M 16 x 1.5 L 7.0 mm
VOMNW10HLWR 12 mm M 18 x 1.5 L 7.0 mm
VOMNW13HLWR 15 mm M 22 x 1.5 L 7.0 mm
VOMNW16HLWR 18 mm M 26 x 1.5 L 7.5 mm
VOMNW20HLWR 22 mm M 30 x 2 L 7.5 mm
VOMNW25HLWR 28 mm M 36 x 2 L 7.5 mm
VOMNW32HLWR 35 mm M 45 x 2 L 10.5 mm
VOMNW40HLWR 42 mm M 52 x 2 L 11.0 mm
VOMNW03HSWR 6 mm M 14 x 1.5 S 7.0 mm
VOMNW04HSWR 8 mm M 16 x 1.5 S 7.0 mm
VOMNW06HSWR 10 mm M 18 x 1.5 S 7.5 mm
VOMNW08HSWR 12 mm M 20 x 1.5 S 7.5 mm
VOMNW13HSWR 16 mm M 24 x 1.5 S 8.5 mm
VOMNW16HSWR 20 mm M 30 x 2 S 10.5 mm
VOMNW20HSWR 25 mm M 36 x 2 S 12.0 mm
VOMNW25HSWR 30 mm M 42 x 2 S 13.5 mm
VOMNW32HSWR 38 mm M 52 x 2 S 16.0 mm
Series: LL = Very light L = Light S = Heavy

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.