VR ED MG

Screw in fitting



Properties

Connection 1 BSP external thread, cylindrical
Connection 2 metric cylindrical outer thread
Design Screw-in fitting
Construction straight
Sealing form 1 Shape E
Sealing form 2 24° inner cone
Scope of supply Socket with union nut and cutting ring
Standard DIN 2353, ISO 8434-1
Material Brass

Hints

Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name Series Operating pressure Ø d2 mm G1 Ø d3 mm i mm L1 mm L2 mm AF mm S1
Product Name Series Operating pressure Ø d2 mm G1 Ø d3 mm i mm L1 mm L2 mm AF mm S1
VR NW 04 HL ED MG L PN 200 6 G 1/8" -28 14,0 8 31,0 8,5 14 14
VR NW 06 HL ED MG L PN 200 8 G 1/4" -19 18,7 12 37,0 10,0 19 17
VR NW 10 HL ED MG L PN 200 12 G 3/8" -19 22,0 12 39,0 12,5 22 22
VR NW 13 HL ED MG L PN 200 15 G 1/2" -14 26,7 14 43,0 14,0 27 27
VR NW 16 HL ED MG L PN 200 18 G 1/2" -14 26,7 14 45,0 14,5 27 32
VR NW 20 HL ED MG L PN 100 22 G 3/4" -14 32,0 16 49,0 16,5 32 36
VR NW 25 HL ED MG L PN 100 28 G 1" -11 39,7 18 52,0 17,5 41 41
VR NW 32 HL ED MG L PN 200 35 G 1.1/4" -11 49,7 20 59,0 17,5 50 50
VR NW 40 HL ED MG L PN 200 42 G 1.1/2" -11 55,0 22 69,0 19,0 55 60
VR NW 03 HS ED MG S PN 400 6 G 1/4" -19 18,7 12 40,0 13,0 19 17
VR NW 04 HS ED MG S PN 400 8 G 1/4" -19 18,7 12 42,0 15,0 19 19
VR NW 06 HS ED MG S PN 400 10 G 3/8" -19 22,0 12 43,0 15,0 22 22
VR NW 08 HS ED MG S PN 400 12 G 3/8" -19 22,0 12 45,0 17,0 22 24
VR NW 13 HS ED MG S PN 250 16 G 1/2" -14 26,7 14 51,0 18,5 27 30
VR NW 16 HS ED MG S PN 250 20 G 3/4" -14 32,0 16 58,0 20,5 32 36
VR NW 20 HS ED MG S PN 250 25 G 1" -11 39,7 18 65,0 23,0 41 46
VR NW 25 HS ED MG S PN 250 30 G 1.1/4" -11 49,7 20 70,0 23,5 50 50
Series: LL = Very light L = Light S = Heavy - PN = Nominal pressure PB = Max. operating pressure - Ø d2 = External pipe diameter

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.