VR HF

Screw-in fitting, French series



Properties

Connection 1 BSP external thread, cylindrical
Connection 2 metric cylindrical outer thread
Construction type French series
Design Screw-in fitting
Construction straight
Sealing form 1 Shape B
Sealing form 2 24° inner cone
Scope of supply Socket with union nut and cutting ring
Surface electro galvanised
Material Steel

Hints

Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name Operating pressure External pipe Ø mm G D mm i mm L1 mm L2 mm S1 S3
Product Name Operating pressure External pipe Ø mm G D mm i mm L1 mm L2 mm S1 S3
VR NW 10 HF 1/4 PN 400 13,25 G 1/4" -19 18 10 33,0 10,5 22 27
VR NW 10 HF PN 400 13,25 G 3/8" -19 22 10 34,5 12,0 22 27
VR NW 10 HF 1/2 PN 400 13,25 G 1/2" -14 26 10 34,5 12,0 22 27
VR NW 13 HF 1/4 PN 250 16,75 G 1/4" -19 18 10 34,5 12,0 27 30
VR NW 13 HF 3/8 PN 250 16,75 G 3/8" -19 22 10 35,5 12,0 27 30
VR NW 13 HF PN 250 16,75 G 1/2" -14 26 12 36,5 13,0 27 30
VR NW 16 HF PN 250 21,25 G 1/2" -14 26 12 39,0 15,0 32 36
VR NW 16 HF 3/4 PN 250 21,25 G 3/4" -14 32 16 40,5 16,5 32 36
VR NW 20 HF PN 250 26,75 G 3/4" -14 32 16 41,5 16,5 41 42
VR NW 20 HF 1 PN 250 26,75 G 1" -11 39 16 43,5 18,5 42 42
VR NW 25 HF PN 160 33,50 G 1" -11 39 16 45,5 20,5 46 55
Series: LL = Very light L = Light S = Heavy - PN = Nominal pressure PB = Max. operating pressure - Ø = External pipe diameter

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.