VSH MG

Reinforcing sleeve for pipes

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Design Support bushes
Material Brass

Article Table

Product Name L1 mm for internal pipe Ø mm Ø D1 mm Ø d2 mm
Product Name L1 mm for internal pipe Ø mm Ø D1 mm Ø d2 mm
VSH 04 ID MG 15.5 4.0 3.8 2.6
VSH 04.5 ID MG 14.0 4.5 4.3 3.1
VSH 05 ID MG 14.0 5.0 4.8 3.6
VSH 06 ID MG 15.5 6.0 5.8 4.6
VSH 07 ID MG 17.0 7.0 6.8 5.6
VSH 08 ID MG 16.5 8.0 7.8 6.6
VSH 09 ID MG 16.5 9.0 8.8 7.6
VSH 10 ID MG 16.5 10.0 9.8 8.6
VSH 11 ID MG 15.5 11.0 10.8 9.6
VSH 12 ID MG 17.0 12.0 11.8 10.2
VSH 13 ID MG 17.0 13.0 12.8 11.2
VSH 14 ID MG 17.0 14.0 13.8 12.2
VSH 15 ID MG 17.5 15.0 14.8 13.2
VSH 16 ID MG 17.5 16.0 15.8 14.2
VSH 17 ID MG 18.0 17.0 16.8 15.2
VSH 18 ID MG 22.0 18.0 17.8 16.2
VSH 19 ID MG 18.0 19.0 18.8 17.2
VSH 20 ID MG 18.0 20.0 19.8 18.2
VSH 21 ID MG 20.0 21.0 20.8 19.2
VSH 22 ID MG 23.5 22.0 21.8 20.2
VSH 24 ID MG 18.0 24.0 23.8 22.2
VSH 25 ID MG 18.0 25.0 24.8 23.2
VSH 26 ID MG 21.0 26.0 25.8 24.2
VSH 31 ID MG 22.5 31.0 30.8 28.8
VSH 32 ID MG 22.5 32.0 31.8 29.2
VSH 38 ID MG 23.5 38.0 37.8 35.8

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.