VSH VA

Reinforcing sleeve for pipes

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Design Support bushes
Material Stainless steel

Article Table

Product Name L1 mm für Rohr-Innen-Ø mm Ø D1 mm Ø d2 mm
Product Name L1 mm für Rohr-Innen-Ø mm Ø D1 mm Ø d2 mm
VSH04IDVA 15.5 mm 4.0 mm 3.8 mm 2.6 mm
VSH05IDVA 14.0 mm 5.0 mm 4.8 mm 3.6 mm
VSH06IDVA 15.5 mm 6.0 mm 5.8 mm 4.6 mm
VSH07IDVA 17.0 mm 7.0 mm 6.8 mm 5.6 mm
VSH08IDVA 16.5 mm 8.0 mm 7.8 mm 6.6 mm
VSH09IDVA 16.5 mm 9.0 mm 8.8 mm 7.6 mm
VSH10IDVA 16.5 mm 10.0 mm 9.8 mm 8.6 mm
VSH11IDVA 15.5 mm 11.0 mm 10.8 mm 9.6 mm
VSH12IDVA 17.0 mm 12.0 mm 11.8 mm 10.2 mm
VSH13IDVA 17.0 mm 13.0 mm 12.8 mm 11.2 mm
VSH14IDVA 17.0 mm 14.0 mm 13.8 mm 12.2 mm
VSH15IDVA 17.5 mm 15.0 mm 14.8 mm 13.2 mm
VSH16IDVA 17.5 mm 16.0 mm 15.8 mm 14.2 mm
VSH17IDVA 18.0 mm 17.0 mm 16.8 mm 15.2 mm
VSH18IDVA 22.0 mm 18.0 mm 17.8 mm 16.2 mm
VSH19IDVA 18.0 mm 19.0 mm 18.8 mm 17.2 mm
VSH20IDVA 18.0 mm 20.0 mm 19.8 mm 18.2 mm
VSH22IDVA 23.5 mm 22.0 mm 21.8 mm 20.2 mm
VSH23IDVA 23.5 mm 23.0 mm 22.8 mm 21.2 mm
VSH24IDVA 18.0 mm 24.0 mm 23.8 mm 22.2 mm
VSH25IDVA 18.0 mm 25.0 mm 24.8 mm 23.2 mm
VSH26IDVA 23.5 mm 26.0 mm 25.8 mm 24.2 mm
VSH30IDVA 21.0 mm 30.0 mm 29.8 mm 27.2 mm
VSH31IDVA 22.5 mm 31.0 mm 30.8 mm 28.8 mm
VSH32IDVA 26.5 mm 32.0 mm 31.8 mm 29.2 mm
VSH33IDVA 26.5 mm 33.0 mm 32.8 mm 30.2 mm
VSH38IDVA 23.5 mm 38.0 mm 37.8 mm 35.8 mm

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.