W45 AJF HJOF

Connector, angle 45°

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 ORFS nut threads
Connection 2 ORFS external threads
Construction Angle 45°
Design Connectors
Material Steel
Sealing form 1 Flat seal
Sealing form 2 flat seal with O-ring
Surface electro galvanised

Article Table

Product Name G1 + G2 Operating pressure S1 AF mm OR
Product Name G1 + G2 Operating pressure S1 AF mm OR
W45 AJF 04 HJOF 9/16"-18 UNF PN 630 17 14 7.65 x 1.78
W45 AJF 06 HJOF 11/16" -16 UN PN 630 22 19 9.25 x 1.78
W45 AJF 08 HJOF 13/16" -16 UN PN 630 24 19 12.42 x 1.78
W45 AJF 10 HJOF 1" -14 UNS PN 400 30 27 15.60 x 1.78
W45 AJF 12 HJOF 1.3/16" -12 UN PN 400 36 30 18.77 x 1.78
W45 AJF 16 HJOF 1.7/16" -12 UN PN 400 41 36 23.52 x 1.78
W45 AJF 20 HJOF 1.11/16" -12 UN PN 250 50 41 29.87 x 1.78
W45 AJF 24 HJOF 2" -12 UN PN 250 60 48 37.82 x 1.78
SW, S1, S2 = With across flats

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.