W45 AN HN

Screw-in socket, angle 45°



Properties

Connection 1 NPT nut thread (NPSM)
Connection 2 NPT external threads
Design Screw-in sockets
Construction Angle 45°
Sealing form 1 60° outer cone
Sealing form 2 thread seal
Surface electro galvanised
Material Steel

Article Table

Product Name G1 G2 AF mm S1
Product Name G1 G2 AF mm S1
W45 AN 02 HN 1/8" -27 NPT 1/8" -27 NPT 11 14
W45 AN 04 HN 1/4" -18 NPT 1/4" -18 NPT 14 18
W45 AN 06 HN 3/8" -18 NPT 3/8" -18 NPT 19 22
W45 AN 06 HN 08 3/8" -18 NPT 1/2" -14 NPT 22 22
W45 AN 08 HN 1/2" -14 NPT 1/2" -14 NPT 22 25
W45 AN 08 HN 12 1/2" -14 NPT 3/4" -14 NPT 27 25
W45 AN 12 HN 3/4" -14 NPT 3/4" -14 NPT 27 32
W45 AN 12 HN 16 3/4" -14 NPT 1" -11.5 NPT 33 32
W45 AN 16 HN 12 1" -11.5 NPT 3/4" -14 NPT 33 38
W45 AN 16 HN 1" -11.5 NPT 1" -11.5 NPT 33 38
W45 AN 20 HN 1.1/4" -11.5 NPT 1.1/4" -11.5 NPT 41 48
W45 AN 24 HN 1.1/2" -11.5 NPT 1.1/2" -11.5 NPT 48 54
W45 AN 32 HN 2" -11.5 NPT 2" -11.5 NPT 64 67
SW, S1, S2 = With across flats

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.