W45 HN HJ

Screw-in socket, angle 45°

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 NPT external threads
Connection 2 UN/UNF external threads
Construction Angle 45°
Design Screw-in sockets
Material Steel
Sealing form 1 thread seal
Sealing form 2 74° outer cone
Surface electro galvanised

Article Table

Product Name G2 AF mm G1
Product Name G2 AF mm G1
W45 HN 02 HJ 04 7/16"-20 UNF 11 1/8" -27 NPT
W45 HN 02 HJ 05 1/2"-20 UNF 13 1/8" -27 NPT
W45 HN 02 HJ 06 9/16"-18 UNF 14 1/8" -27 NPT
W45 HN 04 HJ 7/16"-20 UNF 14 1/4" -18 NPT
W45 HN 04 HJ 05 1/2"-20 UNF 14 1/4" -18 NPT
W45 HN 04 HJ 06 9/16"-18 UNF 14 1/4" -18 NPT
W45 HN 04 HJ 08 3/4" -16 UNF 19 1/4" -18 NPT
W45 HN 06 HJ 9/16"-18 UNF 19 3/8" -18 NPT
W45 HN 06 HJ 08 3/4" -16 UNF 19 3/8" -18 NPT
W45 HN 06 HJ 10 7/8" -14 UNF 22 3/8" -18 NPT
W45 HN 08 HJ 3/4" -16 UNF 22 1/2" -14 NPT
W45 HN 08 HJ 06 9/16"-18 UNF 22 1/2" -14 NPT
W45 HN 08 HJ 10 7/8" -14 UNF 22 1/2" -14 NPT
W45 HN 08 HJ 12 1.1/16" -12 UN 27 1/2" -14 NPT
W45 HN 12 HJ 1.1/16" -12 UN 27 3/4" -14 NPT
W45 HN 12 HJ 08 3/4" -16 UNF 27 3/4" -14 NPT
W45 HN 12 HJ 10 7/8" -14 UNF 27 3/4" -14 NPT
W45 HN 12 HJ 14 1.3/16" -12 UN 33 3/4" -14 NPT
W45 HN 12 HJ 16 1.5/16" -12 UN 33 3/4" -14 NPT
W45 HN 16 HJ 1.5/16" -12 UN 33 1" -11.5 NPT
W45 HN 16 HJ 12 1.1/16" -12 UN 33 1" -11.5 NPT
W45 HN 16 HJ 20 1.5/8" -12 UN 41 1" -11.5 NPT
W45 HN 20 HJ 1.5/8" -12 UN 41 1.1/4" -11.5 NPT
W45 HN 24 HJ 1.7/8" -12 UN 48 1.1/2" -11.5 NPT
W45 HN 32 HJ 2.1/2" -12 UN 55 2" -11.5 NPT
AF = Width across flats

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.