W45 HN HJOF

Screw-in socket, angle 45°



Properties

Connection 1 NPT external threads
Connection 2 ORFS external threads
Design Screw-in sockets
Construction straight
Sealing form 1 thread seal
Sealing form 2 flat seal with O-ring
Surface electro galvanised
Material Steel

Article Table

Product Name G1 G2 AF mm OR
Product Name G1 G2 AF mm OR
W45 HN 02 HJOF 04 1/8" -27 NPT 9/16"-18 UNF 14 7.65 x 1.78
W45 HN 04 HJOF 1/4" -18 NPT 9/16"-18 UNF 14 7.65 x 1.78
W45 HN 04 HJOF 06 1/4" -18 NPT 11/16" -16 UN 19 9.25 x 1.78
W45 HN 06 HJOF 04 3/8" -18 NPT 9/16"-18 UNF 19 7.65 x 1.78
W45 HN 06 HJOF 3/8" -18 NPT 11/16" -16 UN 19 9.25 x 1.78
W45 HN 06 HJOF 08 3/8" -18 NPT 13/16" -16 UN 19 12.42 x 1.78
W45 HN 08 HJOF 06 1/2" -14 NPT 11/16" -16 UN 22 9.25 x 1.78
W45 HN 08 HJOF 1/2" -14 NPT 13/16" -16 UN 22 12.42 x 1.78
W45 HN 08 HJOF 10 1/2" -14 NPT 1" -14 UNS 27 15.60 x 1.78
W45 HN 12 HJOF 3/4" -14 NPT 1.3/16" -12 UN 30 18.77 x 1.78
W45 HN 16 HJOF 1" -11.5 NPT 1.7/16" -12 UN 37 23.52 x 1.78
AF = Width across flats

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.