Screw-in socket, angle 45°

  • Image_1 Image_1
  • Image_2 Image_2


Connection 1 NPT external threads
Connection 2 NPT internal thread
Construction Angle 45°
Design Screw-in sockets
Material Steel
Sealing form 1 thread seal
Sealing form 2 thread seal
Surface electro galvanised

Article Table

Product Name G1 + G2 AF mm
Product Name G1 + G2 AF mm
W45 HN 02 IN 1/8" -27 NPT 14
W45 HN 04 IN 1/4" -18 NPT 19
W45 HN 06 IN 3/8" -18 NPT 22
W45 HN 08 IN 1/2" -14 NPT 27
W45 HN 12 IN 3/4" -14 NPT 33
W45 HN 16 IN 1" -11.5 NPT 41
W45 HN 20 IN 1.1/4" -11.5 NPT 48
W45 HN 24 IN 1.1/2" -11.5 NPT 64
AF = Width across flats


Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.