W45 HRO HJ

Screw-in socket, angle 45°

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 BSP external thread, cylindrical
Connection 2 UN/UNF external threads
Construction Angle 45°
Design Adjustable direction screw-in socket
Material Steel
Sealing form 1 form G
Sealing form 2 74° outer cone
Surface electro galvanised

Article Table

Product Name G2 S1 AF mm G1 OR
Product Name G2 S1 AF mm G1 OR
W45 HRO 02 HJ 05 1/2"-20 UNF 14 13 G 1/8" -28 8.00 x 2.00
W45 HRO 04 HJ 7/16"-20 UNF 19 14 G 1/4" -19 10.77 x 2.62
W45 HRO 04 HJ 05 1/2"-20 UNF 19 14 G 1/4" -19 10.77 x 2.62
W45 HRO 04 HJ 08 3/4" -16 UNF 19 19 G 1/4" -19 10.77 x 2.62
W45 HRO 06 HJ 04 7/16"-20 UNF 22 19 G 3/8" -19 13.94 x 2.62
W45 HRO 06 HJ 05 1/2"-20 UNF 22 19 G 3/8" -19 13.94 x 2.62
W45 HRO 06 HJ 9/16"-18 UNF 22 19 G 3/8" -19 13.94 x 2.62
W45 HRO 06 HJ 10 7/8" -14 UNF 22 22 G 3/8" -19 13.94 x 2.62
W45 HRO 08 HJ 04 7/16"-20 UNF 27 22 G 1/2" -14 17.86 x 2.62
W45 HRO 08 HJ 06 9/16"-18 UNF 27 22 G 1/2" -14 17.86 x 2.62
W45 HRO 08 HJ 3/4" -16 UNF 27 22 G 1/2" -14 17.86 x 2.62
W45 HRO 08 HJ 12 1.1/16" -12 UN 27 27 G 1/2" -14 17.86 x 2.62
W45 HRO 12 HJ 08 3/4" -16 UNF 36 27 G 3/4" -14 23.47 x 2.62
W45 HRO 12 HJ 10 7/8" -14 UNF 36 27 G 3/4" -14 23.47 x 2.62
W45 HRO 24 HJ 1.7/8" -12 UN 55 48 G 1.1/2" -11 44.04 x 3.53
SW, S1, S2 = With across flats

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.