Screw-in socket, angle 45°

  • Image_1 Image_1
  • Image_2 Image_2


Connection 1 BSP external thread, cylindrical
Connection 2 ORFS external threads
Construction Angle 45°
Design Screw-in sockets
Material Steel
Sealing form 1 form G
Sealing form 2 flat seal with O-ring
Surface electro galvanised

Article Table

Product Name OR2 G2 S1 AF mm G1 OR1
Product Name OR2 G2 S1 AF mm G1 OR1
W45 HRO 20 HJOF 29.87 x 1.78 1.11/16" -12 UN 50 41 G 1.1/4" -11 37.69 x 3.53
W45 HRO 24 HJOF 37.82 x 1.78 2" -12 UN 55 50 G 1.1/2" -11 44.04 x 3.53
SW, S1, S2, S3 = With across flats


Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.