W45 HROK HJ

Screw-in socket, angle 45°



Properties

Connection 1 BSP external thread, cylindrical
Connection 2 UN/UNF external threads
Design Adjustable direction screw-in socket
Construction Angle 45°
Sealing form 1 Thread socket with O-ring + spacer diaphragm ring
Sealing form 2 74° outer cone
Surface electro galvanised
Material Steel

Article Table

Product Name G1 G2 AF mm S1 OR
Product Name G1 G2 AF mm S1 OR
W45 HROK 02 HJ 04 G 1/8" -28 7/16"-20 UNF 11 14 8.00 x 2.00
W45 HROK 02 HJ 05 G 1/8" -28 1/2"-20 UNF 13 14 8.00 x 2.00
W45 HROK 04 HJ G 1/4" -19 7/16"-20 UNF 19 14 10.77 x 2.62
W45 HROK 04 HJ 05 G 1/4" -19 1/2"-20 UNF 14 19 10.77 x 2.62
W45 HROK 04 HJ 06 G 1/4" -19 9/16"-18 UNF 14 19 10.77 x 2.62
W45 HROK 04 HJ 08 G 1/4" -19 3/4"-16 UNF 19 19 10.77 x 2.62
W45 HROK 06 HJ 04 G 3/8" -19 7/16"-20 UNF 19 22 13.94 x 2.62
W45 HROK 06 HJ 05 G 3/8" -19 1/2"-20 UNF 19 22 13.94 x 2.62
W45 HROK 06 HJ G 3/8" -19 9/16"-18 UNF 19 22 13.94 x 2.62
W45 HROK 06 HJ 08 G 3/8" -19 3/4"-16 UNF 19 22 13.94 x 2.62
W45 HROK 06 HJ 10 G 3/8" -19 7/8"-14 UNF 22 22 13.94 x 2.62
W45 HROK 08 HJ 04 G 1/2" -14 7/16"-20 UNF 22 27 17.86 x 2.62
W45 HROK 08 HJ 06 G 1/2" -14 9/16"-18 UNF 22 27 17.86 x 2.62
W45 HROK 08 HJ G 1/2" -14 3/4"-16 UNF 22 27 17.86 x 2.62
W45 HROK 08 HJ 10 G 1/2" -14 7/8"-14 UNF 22 27 17.86 x 2.62
W45 HROK 08 HJ 12 G 1/2" -14 1.1/16" -12 UN 27 27 17.86 x 2.62
W45 HROK 10 HJ G 5/8" -14 7/8"-14 UNF 22 27 19.70 x 2.62
W45 HROK 10 HJ 12 G 5/8" -14 1.1/16" -12 UN 27 36 19.70 x 2.62
W45 HROK 12 HJ 08 G 3/4" -14 3/4"-16 UNF 27 36 23.47 x 2.62
W45 HROK 12 HJ 10 G 3/4" -14 7/8"-14 UNF 27 36 23.47 x 2.62
W45 HROK 12 HJ G 3/4" -14 1.1/16" -12 UN 27 36 23.47 x 2.62
W45 HROK 12 HJ 16 G 3/4" -14 1.5/16" -12 UN 33 36 23.47 x 2.62
W45 HROK 16 HJ 12 G 1" -11 1.1/16" -12 UN 33 41 29.74 x 3.53
W45 HROK 16 HJ G 1" -11 1.5/16" -12 UN 33 41 23.47 x 3.53
W45 HROK 16 HJ 20 G 1" -11 1.5/8" -12 UN 41 41 29.74 x 3.53
W45 HROK 20 HJ 16 G 1.1/4" -11 1.5/16" -12 UN 33 50 37.69 x 3.53
W45 HROK 20 HJ G 1.1/4" -11 1.5/8" -12 UN 41 50 37.96 x 3.53
W45 HROK 20 HJ 24 G 1.1/4" -11 1.7/8" -12 UN 48 50 37.69 x 3.53
W45 HROK 24 HJ G 1.1/2" -11 1.7/8" -12 UN 48 55 44.04 x 3.53
SW, S1, S2 = With across flats

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.