W45 HROK HJOF

Screw-in socket, angle 45°

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 BSP external thread, cylindrical
Connection 2 ORFS external threads
Construction Angle 45°
Design Adjustable direction screw-in socket
Material Steel
Sealing form 1 Thread socket with O-ring + spacer diaphragm ring
Sealing form 2 flat seal with O-ring
Surface electro galvanised

Article Table

Product Name OR2 G2 S1 OR1 SW mm G1
Product Name OR2 G2 S1 OR1 SW mm G1
W45HROK02HJOF04 7.65 x 1.78 9/16"-18 UNF 14 8.00 x 2.00 14 mm G 1/8" -28
W45HROK04HJOF 7.65 x 1.78 9/16"-18 UNF 19 10.77 x 2.62 19 mm G 1/4" -19
W45HROK04HJOF06 9.25 x 1.78 11/16" -16 UN 19 10.77 x 2.62 19 mm G 1/4" -19
W45HROK06HJOF 9.25 x 1.78 11/16" -16 UN 22 13.94 x 2.62 19 mm G 3/8" -19
W45HROK06HJOF08 12.42 x 1.78 13/16" -16 UN 22 13.94 x 2.62 19 mm G 3/8" -19
W45HROK08HJOF06 9.25 x 1.78 11/16" -16 UN 27 17.86 x 2.62 27 mm G 1/2" -14
W45HROK08HJOF10 15.60 x 1.78 1" -14 UNS 27 17.86 x 2.62 27 mm G 1/2" -14
W45HROK08HJOF 12.42 x 1.78 13/16" -16 UN 27 17.86 x 2.62 27 mm G 1/2" -14
W45HROK12HJOF10 15.60 x 1.78 1" -14 UNS 36 23.47 x 2.62 30 mm G 3/4" -14
W45HROK12HJOF 18.77 x 1.78 1.3/16" -12 UN 36 23.47 x 2.62 30 mm G 3/4" -14
W45HROK16HJOF12 18.77 x 1.78 1.3/16" -12 UN 41 29.75 x 3.53 36 mm G 1" -11
W45HROK16HJOF 23.52 x 1.78 1.7/16" -12 UN 41 29.75 x 3.53 36 mm G 1" -11
W45HROK20HJOF 29.87 x 1.78 1.11/16" -12 UN 50 37.69 x 3.53 41 mm G 1.1/4" -11
W45HROK24HJOF 37.82 x 1.78 2" -12 UN 55 44.04 x 3.53 50 mm G 1.1/2" -11
SW, S1, S2 = With across flats

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.