W45 O AN

Screw-in socket, angle 45°



Properties

Connection 1 UN/UNF external threads
Connection 2 NPSM nut thread
Design Adjustable direction screw-in socket
Construction Angle 45°
Sealing form 1 O-ring seal on screw-in socket
Sealing form 2 60° outer cone
Surface electro galvanised
Material Steel

Article Table

Product Name G1 G2 AF mm S1 S2 OR
Product Name G1 G2 AF mm S1 S2 OR
W45 O 04 AN 7/16"-20 UNF 1/4" -18 NPT 11 14 18 8.92 x 1.83
W45 O 06 AN 04 9/16"-18 UNF 1/4" -18 NPT 14 22 14 11.90 x 1.98
W45 O 06 AN 9/16"-18 UNF 3/8" -18 NPT 14 18 22 11.90 x 1.98
W45 O 08 AN 06 3/4"-16 UNF 3/8" -18 NPT 19 22 22 16.36 x 2.20
W45 O 08 AN 3/4"-16 UNF 1/2" -14 NPT 19 22 25 16.36 x 2.20
W45 O 08 AN 12 3/4"-16 UNF 3/4" -14 NPT 19 22 32 16.36 x 2.20
W45 O 10 AN 08 7/8"-14 UNF 1/2" -14 NPT 22 25 25 19.18 x 2.46
W45 O 12 AN 1.1/16" -12 UN 3/4" -14 NPT 27 32 32 23.47 x 2.95
SW, S1, S2 = With across flats

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.