W45 O HB

Screw-in socket, angle 45°

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 UN/UNF external threads
Connection 2 BSP cylindrical external threads
Construction Angle 45°
Design Screw-in sockets
Material Steel
Online-Shop https://shop.hansa-flex.com/de/W45OHB
Sealing form 1 O-ring seal on screw-in socket
Sealing form 2 60° inner cone
Surface electro galvanised

Article Table

Product Name G2 S1 SW mm G1 OR
Product Name G2 S1 SW mm G1 OR
W45O04HB02 G 1/8" -28 14 11 mm 7/16"-20 UNF 8.92 x 1.83
W45O04HB G 1/4" -19 14 11 mm 7/16"-20 UNF 8.92 x 1.83
W45O04HB06 G 3/8" -19 14 14 mm 7/16"-20 UNF 8.92 x 1.83
W45O05HB02 G 1/8" -28 16 13 mm 1/2"-20 UNF 10.52 x 1.83
W45O05HB04 G 1/4" -19 16 13 mm 1/2"-20 UNF 10.52 x 1.83
W45O06HB04 G 1/4" -19 17 14 mm 9/16"-18 UNF 11.90 x 1.98
W45O06HB G 3/8" -19 17 14 mm 9/16"-18 UNF 11.90 x 1.98
W45O08HB04 G 1/4" -19 22 19 mm 3/4" -16 UNF 16.36 x 2.20
W45O08HB06 G 3/8" -19 22 19 mm 3/4" -16 UNF 16.36 x 2.20
W45O08HB G 1/2" -14 22 19 mm 3/4" -16 UNF 16.36 x 2.20
W45O08HB12 G 3/4" -14 22 27 mm 3/4" -16 UNF 16.36 x 2.20
W45O10HB06 G 3/8" -19 25 22 mm 7/8" -14 UNF 19.18 x 2.46
W45O10HB08 G 1/2" -14 25 22 mm 7/8" -14 UNF 19.18 x 2.46
W45O10HB12 G 3/4" -14 25 27 mm 7/8" -14 UNF 19.18 x 2.46
W45O12HB08 G 1/2" -14 32 27 mm 1.1/16" -12 UN 23.47 x 2.95
W45O12HB G 3/4" -14 32 27 mm 1.1/16" -12 UN 23.47 x 2.95
W45O12HB16 G 1" -11 32 33 mm 1.1/16" -12 UN 23.47 x 2.95
W45O16HB12 G 3/4" -14 38 33 mm 1.5/16" -12 UN 29.74 x 2.95
W45O16HB G 1" -11 38 33 mm 1.5/16" -12 UN 29.74 x 2.95
SW, S1, S2 = With across flats

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.