W45 O HJ

Screw-in socket, angle 45°



Properties

Connection 1 UN/UNF external threads
Connection 2 UN/UNF external threads
Design Adjustable direction screw-in socket
Construction Angle 45°
Sealing form 1 O-ring seal on screw-in socket
Sealing form 2 74° outer cone
Surface electro galvanised
Material Steel

Article Table

Product Name G1 G2 AF mm S1 OR
Product Name G1 G2 AF mm S1 OR
W45 O 04 HJ 7/16"-20 UNF 7/16"-20 UNF 11 14 8.92 x 1.83
W45 O 05 HJ 04 1/2"-20 UNF 7/16"-20 UNF 13 16 10.52 x 1.83
W45 O 05 HJ 1/2"-20 UNF 1/2"-20 UNF 13 16 10.52 x 1.83
W45 O 06 HJ 9/16"-18 UNF 9/16"-18 UNF 14 17 11.90 x 1.98
W45 O 06 HJ 08 9/16"-18 UNF 3/4"-16 UNF 19 17 11.90 x 1.98
W45 O 08 HJ 06 3/4"-16 UNF 9/16"-18 UNF 19 22 16.36 x 2.20
W45 O 08 HJ 3/4"-16 UNF 3/4"-16 UNF 19 22 16.36 x 2.20
W45 O 08 HJ 10 3/4"-16 UNF 7/8"-14 UNF 22 22 16.36 x 2.20
W45 O 08 HJ 12 3/4"-16 UNF 1.1/16" -12 UN 22 27 16.36 x 2.20
W45 O 10 HJ 08 7/8"-14 UNF 3/4"-16 UNF 22 25 19.18 x 2.46
W45 O 10 HJ 7/8"-14 UNF 7/8"-14 UNF 22 27 19.18 x 2.46
W45 O 10 HJ 12 7/8"-14 UNF 1.1/16" -12 UN 27 25 19.18 x 2.46
W45 O 12 HJ 08 1.1/16" -12 UN 3/4"-16 UNF 22 32 23.47 x 2.95
W45 O 12 HJ 10 1.1/16" -12 UN 7/8"-14 UNF 32 22 23.47 x 2.95
W45 O 12 HJ 1.1/16" -12 UN 1.1/16" -12 UN 27 32 23.47 x 2.95
W45 O 12 HJ 16 1.1/16" -12 UN 1.5/16" -12 UN 33 32 23.47 x 2.95
W45 O 16 HJ 12 1.5/16" -12 UN 1.1/16" -12 UN 38 27 29.74 x 2.95
W45 O 16 HJ 1.5/16" -12 UN 1.5/16" -12 UN 33 38 29.74 x 2.95
W45 O 16 HJ 20 1.5/16" -12 UN 1.5/8" -12 UN 41 38 29.74 x 2.95
W45 O 20 HJ 16 1.5/8" -12 UN 1.5/16" -12 UN 33 48 37.47 x 3.00
W45 O 20 HJ 1.5/8" -12 UN 1.5/8" -12 UN 41 48 37.47 x 3.00
W45 O 24 HJ 1.7/8" -12 UN 1.7/8" -12 UN 48 54 43.69 x 3.00
W45 O 32 HJ 2.1/2" -12 UN 2.1/2" -12 UN 66 70 59.36 x 3.00
SW, S1, S2 = With across flats

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.