W90 AJ HJ

Screw-on socket, angle 90°

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 UN/UNF nut threads
Connection 2 UN/UNF external threads
Construction Angle 90°
Design Screw-on socket
Material Steel
Sealing form 1 74° inner cone
Sealing form 2 74° outer cone
Surface electro galvanised

Article Table

Product Name G1 + G2 S1 AF mm
Product Name G1 + G2 S1 AF mm
W90 AJ 04 HJ 7/16"-20 UNF Screw-on socket, angle 90°; Steel 14 12
W90 AJ 05 HJ 1/2"-20 UNF Screw-on socket, angle 90°; Steel 17 13
W90 AJ 06 HJ 9/16"-18 UNF Screw-on socket, angle 90°; Steel 19 14
W90 AJ 08 HJ 3/4" -16 UNF Screw-on socket, angle 90°; Steel 22 19
W90 AJ 10 HJ 7/8" -14 UNF Screw-on socket, angle 90°; Steel 27 22
W90 AJ 12 HJ 1.1/16" -12 UN Screw-on socket, angle 90°; Steel 32 27
W90 AJ 14 HJ 1.3/16" -12 UN Screw-on socket, angle 90°; Steel 36 33
W90 AJ 16 HJ 1.5/16" -12 UN Screw-on socket, angle 90°; Steel 41 33
W90 AJ 20 HJ 1.5/8" -12 UN Screw-on socket, angle 90°; Steel 50 41
W90 AJ 24 HJ 1.7/8" -12 UN Screw-on socket, angle 90°; Steel 60 48
W90 AJ 32 HJ 2.1/2" -12 UN Screw-on socket, angle 90°; Steel 75 65
SW, S1, S2, S3 = With across flats

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.