W90 AN HN

Screw-in socket, angle 90°

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 NPT nut thread (NPSM)
Connection 2 NPT-external threads
Construction Angle 90°
Design Screw-in sockets
Material Steel
Sealing form 1 60° outer cone
Sealing form 2 thread seal
Surface electro galvanised

Article Table

Product Name G2 S1 AF mm G1
Product Name G2 S1 AF mm G1
W90 AN 02 HN 1/8" -27 NPT 14 11 1/8" -27 NPT
W90 AN 04 HN 02 1/8" -27 NPT 18 14 1/4" -18 NPT
W90 AN 04 HN 1/4" -18 NPT 18 14 1/4" -18 NPT
W90 AN 04 HN 06 3/8" -18 NPT 18 19 1/4" -18 NPT
W90 AN 04 HN 08 1/2" -14 NPT 18 19 1/4" -18 NPT
W90 AN 06 HN 04 1/4" -18 NPT 22 19 3/8" -18 NPT
W90 AN 06 HN 3/8" -18 NPT 22 19 3/8" -18 NPT
W90 AN 06 HN 08 1/2" -14 NPT 22 22 3/8" -18 NPT
W90 AN 06 HN 12 3/4" -14 NPT 22 25 3/8" -18 NPT
W90 AN 08 HN 06 3/8" -18 NPT 25 22 1/2" -14 NPT
W90 AN 08 HN 1/2" -14 NPT 25 22 1/2" -14 NPT
W90 AN 08 HN 12 3/4" -14 NPT 25 27 1/2" -14 NPT
W90 AN 12 HN 08 1/2" -14 NPT 32 27 3/4" -14 NPT
W90 AN 12 HN 3/4" -14 NPT 32 27 3/4" -14 NPT
W90 AN 12 HN 16 1" -11.5 NPT 32 33 3/4" -14 NPT
W90 AN 16 HN 12 3/4" -14 NPT 38 33 1" -11.5 NPT
W90 AN 16 HN 1" -11.5 NPT 38 33 1" -11.5 NPT
W90 AN 20 HN 1.1/4" -11.5 NPT 48 41 1.1/4" -11.5 NPT
W90 AN 20 HN 24 1.1/2" -11.5 NPT 48 48 1.1/4" -11.5 NPT
W90 AN 24 HN 1.1/2" -11.5 NPT 54 48 1.1/2" -11.5 NPT
W90 AN 32 HN 2" -11.5 NPT 67 64 2" -11.5 NPT
SW, S1, S2 = With across flats

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.